Team I am having issues with Volume 1 Lab 6. I got to the part on task 6.4 where the DSG is basically explaining that R2 will not send out Inverse arp requests but will respond to them.
The last command I entered was turning on inverse arp for router R4. When I
do sh frame map I get the following output:
R4#sh frame map
Serial0/0/0 (up): ip 150.100.100.2 dlci 412(0x19C,0x64C0), dynamic,
broadcast,, status defined, active
The DSG says I should also see DLCI 402 and then be able to ping its IP
150.100.24.2 but I am not able to see that DLCI or ping it. I have checked
all of my commands several times and I also downloaded the latest DSG from
the site to make sure there were no updates.
I also watched the Vol 1 walkthrough video to see if there was another
example there but the video does not follow all of the same steps that are
listed in the DSG.
Please let me know how I should proceed? I am also including the
configurations for routers R2 and R4.
Thank You
R2.rtf
Description: MS-Word document
R4.rtf
Description: MS-Word document
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
