I logged in to rack 106 and loaded up vol 1 lab 13 startup configs. When it came up nothing in the frame relay cloud was matching up with what I had on my drawings. It looked like there was config on the rack that hadn't be wiped and the configs were merged. So I reverted the rack, waited 15 minutes and loaded the configs again. This time the configs look close but I am still having an issue between R2 and R4.
R2 _____________ interface Serial0/1/0 description Frame Relay Links no ip address encapsulation frame-relay no frame-relay inverse-arp ! interface Serial0/1/0.24 point-to-point description Frame Relay Cloud 2 bandwidth 64 ip address 150.100.24.2 255.255.255.0 ! interface Serial0/1/0.256 multipoint description Frame Relay Cloud 1 bandwidth 64 ip address 150.100.100.2 255.255.255.0 frame-relay map ip 150.100.100.5 205 broadcast frame-relay map ip 150.100.100.6 206 broadcast R4 _______ interface Serial0/0/0 bandwidth 64 ip address 150.100.24.4 255.255.255.0 encapsulation frame-relay frame-relay map ip 150.100.24.2 402 broadcast no frame-relay inverse-arp frame-relay lmi-type cisco I believe I need to add a frame-relay interface-dlci command to R2 s0/1/0.24 but when I try to add this to s0/1/0.24: frame-relay interface-dlci 204 I get this: %PVC already assigned to interface Serial0/1/0 I even reloaded the router. Any help? Is there a problem with the startup configs?
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
