Any thoughts?>
From: [email protected] [mailto:[email protected]] On Behalf Of Jason Maynard Sent: August-17-10 9:36 AM To: [email protected] Subject: [OSL | CCIE_RS] DSL Connection What I want to do is (note: this is a test network to validate firewall redundancy and not ISP redundancy) 1. Router makes the DSL connection to the ISP 2. The Firewalls are an Active/Active pair and are asssigned the external IP address which are static The question is this, do i just configure the router interface that is facing the ISP as the pppoe cleint and ensure that all interfaces on the router connecting to the ISP, FW1 and FW2 are in the same VLAN and then assign the static IPs on the FW Active/Active Cluster. (These are not Cisco firewalls) Hope the format stays _____ ISP ___ | | _____________ Router _____________ | | | | _____ _____ FW1 FW2 _____ _____ ########### Router Config ########### interface FastEthernet0 description ISP-DSL switchport access vlan 999 pppoe enable pppoe-client dial-pool-number 1 ! interface FastEthernet1 description FW1 switchport mode access switchport access vlan 999 ! interface FastEthernet2 description FW2 switchport access vlan 999 ! interface Dialer1 mtu 1492 no ip address encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer persistent no cdp enable ppp authentication chap ppp chap hostname XXXXXXXXXXXXX ppp chap password 7 XXXXXXXXXXXXX Jason Maynard
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
