I agree, install Wireshark and run a packet capture filtering on only broadcast
traffic. You can be as creative as you want with the filters and expressions
however this should get you going
eth.dst==ff:ff:ff:ff:ff:ff
-Steve
________________________________
From: [email protected]
[mailto:[email protected]] On Behalf Of Combatant 101
Sent: Friday, September 17, 2010 7:02 AM
To: 'raghav gurung'; [email protected]
Subject: Re: [OSL | CCIE_RS] Identifying Broadcast
I'd imagine debug ip packets, look for any broadcast packets and make note of
the SRC address?
Get a SPAN and use wireshark, it formats it nicely and even identifies the
packets as 'broadcasts' showing SRC address etc
From: [email protected]
[mailto:[email protected]] On Behalf Of raghav gurung
Sent: 17 September 2010 14:46
To: [email protected]
Subject: [OSL | CCIE_RS] Identifying Broadcast
Is there any way/command that i can check from which IP i am getting broadcast
traffic.
--
Regd
Raghav Gurung
+91 9582307405
UHS Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient (s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution of this information is prohibited. If this was sent to you in
error, please notify the sender by reply e-mail and destroy all copies of the
original message.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
