Hi Eric, I use a 2610 with NM-4A/S for a Terminal server in my lab - I only use it for console access to 3750s/3550s and use dynamips for the router simulator - my setup is described here http://noshut.blogspot.com/2010/02/2610-with-nm-4as-acting-as-terminal.htmlif it is any help.
If you can include a "show line" as well as the show run of the "line" related config and any associated serial port settings, that would be helpful. I'm assuming that you have already tried swapping cables/ports between working/partly working devices to attempt to isolate the problem - my understanding is that there should be no major difference with different devices when it comes to cisco console connections. Something that may be worth checking to be certain is to see if flow control is disabled. Cheers, Adam On Mon, Oct 11, 2010 at 11:55 PM, Tyson Scott <[email protected]> wrote: > Can I see your line configuration on the terminal server. There > shouldn't be any difference. > > > > Regards, > > > > Tyson Scott - CCIE #13513 R&S, Security, and SP > > Managing Partner / Sr. Instructor - IPexpert, Inc. > > Mailto: [email protected] > > Telephone: +1.810.326.1444, ext. 208 > > Live Assistance, Please visit: www.ipexpert.com/chat > > eFax: +1.810.454.0130 > > > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco > CCIE (R&S, Voice, Security & Service Provider) certification(s) with > training locations throughout the United States, Europe, South Asia and > Australia. Be sure to visit our online communities at > www.ipexpert.com/communities and our public website at www.ipexpert.com > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *jknipp > *Sent:* Monday, October 11, 2010 9:50 AM > *To:* [email protected] > *Subject:* [OSL | CCIE_RS] Terminal Server Weirdness > > > > Experts, > > I have an odd question I thought this group might have some ideas on. I > have a 2610xm router configured as a terminal server to access my own home > study rack. I have 28xx routers for my R1-R9 routers and 3725 routers for > my BB1-BB3 routers. I have no trouble accessing my 28xx routers via the > terminal server however when I try to access the 3725 routers via the > terminal server, I see the boot messages and console messages, but I am > unable to login or send any commands to the routers. Any thoughts? Should > the terminal server settings be any different for the 28xx routers vs the > 37xx series? Any insight is appreciated. > > Thanks, > > Eric > -- > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
