yeah i just seen that 252 thing, and i didnt even take the netbios stuff into consideration, just slapped it together too quick...
i am sure someone smarter will post the answer soon enough for me to check out... yeah it is good stuff, keep them going i enjoy it... -- Garry L. Baker "There is no 'patch' for stupidity." - www.sqlsecurity.com On Tue, Oct 19, 2010 at 6:27 PM, Jason Maynard <[email protected]>wrote: > Fair enough about the restrictions. I will add some to the question. > > > > But let’s have a look at the configuration > > > > I have never used and cannot check it out (ok maybe a little lazy to > check) “network 172.16.22.0 255.255.255.0 secondary” I assume that this > works. > > > > excluded needs 172.16.18.253 > > > > default route is to 253 and not 252 as required > > > > Good stuff! > > > > > > *From:* garry baker [mailto:[email protected]] > *Sent:* October-19-10 9:10 PM > *To:* Jason Maynard > > *Cc:* [email protected] > *Subject:* Re: [OSL | CCIE_RS] Troubleshooting #2 > > > > you didnt give any restrictions, so: > > > RA > ip dhcp excluded-address 172.16.18.1 172.16.18.12 > ip dhcp excluded-address 172.16.18.14 172.16.18.252 > ! > ip dhcp pool 0 > network 172.16.18.0 255.255.255.0 > network 172.16.22.0 255.255.255.0 secondary > domain-name packetsanalyzed.com > dns-server 172.16.1.250 172.16.2.251 > netbios-name-server 172.16.1.18 > default-router 172.16.18.252 172.16.18.253 > netbios-node-type p-node > lease 30 > > RB > interface Serial0/1 > ip address negotiated > encapsulation ppp > no fair-queue > serial restart-delay 0 > clock rate 2000000 > ppp ipcp route default > > RB(config-if)#do sh ip route > Gateway of last resort is 172.16.18.253 to network 0.0.0.0 > > 172.16.0.0/32 is subnetted, 2 subnets > C 172.16.18.253 is directly connected, Serial0/1 > C 172.16.18.13 is directly connected, Serial0/1 > 10.0.0.0/24 is subnetted, 1 subnets > C 10.0.0.0 is directly connected, FastEthernet0/1 > S* 0.0.0.0/0 [1/0] via 172.16.18.253 > > > > > -- > Garry L. Baker > > "There is no 'patch' for stupidity." - www.sqlsecurity.com > > On Tue, Oct 19, 2010 at 3:50 PM, Jason Maynard <[email protected]> > wrote: > > Since the first one seem to create some good dialog I thought I would try > it again > > > > RB should have a *default route* to serial 1/0 (172.16.18.252) on RA. > Domain name, DNS, netbios, netbios type, and lease is required. Lab it up if > required. > > > > > > The configuration can be found here > > http://packetsanalyzed.blogspot.com/2010/10/troubleshooting-2.html > > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
