Correct, timers are interface specific. On Tue, Nov 9, 2010 at 1:20 PM, --Hammer-- <[email protected]> wrote:
> So in the Advanced OSPF Filtering and Configurations VOD, Joe is asked to > configure OSPF w/o the “network” statement so it’s done on a per interface > basis. Makes sense. Next, he has to manipulate the timers on VLAN 567. Also > he has to used dotted decimal notation for the area ID. So the result is: > > > > R7 > > Int lo0 > > Ip ospf 1 area 0.0.2.55 > > > > Int fa0/0 > > Ip ospf 1 area 0.0.2.55 > > Ip ospf dead-interval minimal hello-multiplier 5 > > > > This all makes sense. But where I’m confused is why the timers aren’t also > adjusted on the lo0. If the Lo0 IP is used for the RID in OSPF, is that ONLY > as a numerical reference? Nothing to do with the actual forming of > adjacencies? So the interface doing the adjacencies on 567 is the only > interface that actually needs the timers adjusted? I guess this makes sense > I’m just stumbling on it. Am I off on this? > > > > > > > > --Hammer > > > > "I was a normal American nerd." > -Jack Herer > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
