I was trying to ping from R5 to Cat3, which is configured with ether channel
and int fa0/5 of cat 3  is in correct Vlan 1100,  which is the correct Vlan
but I am not able to ping from R5 and get encapsulation failed error . When
I did debug I get this out put but not sure what is the problem ?. All
interface on CAT3 and R5 shows up. I know its layer 2 issue and Mac address
is not getting resolved but not sure why ?



Here is output………………





R5#ping 192.168.100.13



Type escape sequence to abort.

.

*Nov 20 03:28:57.606: IP: s=192.168.100.5 (local), d=192.168.100.13
(FastEthernet0/1), len 100, sending

*Nov 20 03:28:57.606: IP: s=192.168.100.5 (local), d=192.168.100.13
(FastEthernet0/1), len 100, encapsulation failed.

*Nov 20 03:28:59.606: IP: s=192.168.100.5 (local), d=192.168.100.13
(FastEthernet0/1), len 100, sending

*Nov 20 03:28:59.606: IP: s=192.168.100.5 (local), d=192.168.100.13
(FastEthernet0/1), len 100, encapsulation failed

R5#sh arp

Protocol  Address          Age (min)  Hardware Addr   Type   Interface

Internet  192.168.100.5           -   0012.8032.0af9  ARPA   FastEthernet0/1

Internet  192.168.100.13          0   Incomplete      ARPA

R5#

============================================================

Cat3(config-if)#do sh ether sum

Flags:  D - down        P - bundled in port-channel

        I - stand-alone s - suspended

        H - Hot-standby (LACP only)

        R - Layer3      S - Layer2

        U - in use      f - failed to allocate aggregator



        M - not in use, minimum links not met

        u - unsuitable for bundling

        w - waiting to be aggregated

        d - default port





Number of channel-groups in use: 3

Number of aggregators:           3



Group  Port-channel  Protocol    Ports

------+-------------+-----------+-----------------------------------------------

1      Po1(SU)         LACP      Fa0/19(P)   Fa0/20(P)

2      Po2(SU)         LACP      Fa0/21(P)   Fa0/22(P)

3      Po3(SU)         LACP      Fa0/23(P)   Fa0/24(P)



Cat3#sh run int fa0/5

Building configuration...



Current configuration : 81 bytes

!

interface FastEthernet0/5

 switchport mode access

 switchport nonegotiate
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to