Hi
http://www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a008009478e.shtml#vlan1003
Hope this help. It will be the same as you are facing.
VLAN Creation Fails with VLAN 1003 parent VLAN missing Error Message
Switch#conf t
>Enter configuration commands, one per line. End with CNTL/Z.
>Switch(config)#vlan 102
>Switch(config-vlan)#name marketing
>Switch(config-vlan)#exit
>VLAN 1003 parent VLAN missing
>APPLY VLAN changes failed.
>Switch(config)#end
>Switch#
A misconfiguration on a switch can cause the configuration updates of the
VTP
to fail. In most cases, the problem is that the new VLAN created in the
VTP
server switch does not propagate to the VTP client switches, which creates
host connectivity issues.
A common cause for this issue is a VTP version mismatch between the
switches
in a VTP domain. VTP version 1 and VTP version 2 are not interoperable on the
network devices in the same VTP domain. A VTP version 2 capable network
device
can operate with a network device that runs VTP version 1, provided that
VTP
version 2 is disabled on the VTP version 2 capable network device. VTP
version
2 is disabled by default. Every network device in the VTP domain must use
the
same VTP version. Verify the VTP version that runs on a switch. If VTP
version
2 is enabled, disable it in order to resolve this issue.
Verify if the switch is configured properly for other VTP parameters:
* Verify that the switches are connected through trunk links, because
VTP
updates are only exchanged over trunk links.
* Verify that the VTP domain name is exactly the same on the
appropriate
switches. The name is case sensitive. The VTP updates are only
exchanged
between switches in the same VTP domain.
* Verify that the VTP password is exactly the same on all the switches
in the
domain. The password is case sensitive. If a password is configured, it
must
be configured on all switches in the domain and the password must be the
same.
In case of a VTP convergence issue, where a VTP client does not update the
VLAN information, the workaround is to force a VTP convergence by the
creation, then the removal of a dummy VLAN on the VTP server. This increments
the revision number and forces all VTP clients to update their VLAN
database.
Regards,
Phyo
________________________________
From: Amer Mustafa <[email protected]>
To: [email protected]
Sent: Thursday, November 25, 2010 8:40:36
Subject: [OSL | CCIE_RS] VLANs.
Can anyone advice :
i am trying to create vlan 666 on Cat1 in proctorlanbs :
Cat3550-1(config)#
Cat3550-1(config)#vlan 666
Cat3550-1(config-vlan)#exit
VLAN 1003 parent VLAN missing
APPLY VLAN changes failed.
Cat3550-1(config)#
its giving me this error :
VLAN 1003 parent VLAN missing
APPLY VLAN changes failed.
what is the reason ?
thanks
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
