Solved this one already, I had to add the multihop command on R5 since its FR hub-n-spoke and the traffic to R6 from R5 goes throgh R2. So its one extra hop. Sent from my BlackBerry® smartphone provided by mobily
-----Original Message----- From: Emmanuel Aramide <[email protected]> Date: Mon, 29 Nov 2010 17:51:43 To: Tyson Scott<[email protected]> Cc: Amer Mustafa<[email protected]>; <[email protected]> Subject: Re: [OSL | CCIE_RS] WORKBOOK 1 - LAB 13 TAKS 1.2 Lets see your interface and igp configs. Not sure whats going on here. Regards Emmanuel On 29 November 2010 15:08, Tyson Scott <[email protected]> wrote: > I can see that you can reach the loopback from the physicals but did you > try sourced from the loopbacks. > > > > Regards, > > > > Tyson Scott - CCIE #13513 R&S, Security, and SP > > Managing Partner / Sr. Instructor - IPexpert, Inc. > > Mailto: [email protected] > > Telephone: +1.810.326.1444, ext. 208 > > Live Assistance, Please visit: www.ipexpert.com/chat > > eFax: +1.810.454.0130 > > > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco > CCIE (R&S, Voice, Security & Service Provider) certification(s) with > training locations throughout the United States, Europe, South Asia and > Australia. Be sure to visit our online communities at > www.ipexpert.com/communities and our public website at www.ipexpert.com > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Amer Mustafa > *Sent:* Sunday, November 28, 2010 7:36 PM > *To:* [email protected] > *Subject:* [OSL | CCIE_RS] WORKBOOK 1 - LAB 13 TAKS 1.2 > > > > *WORKBOOK 1 - LAB 13 TAKS 1.2 * > > > > *BGP PEERING BETWEEN R5 AND R6 ARE NOT COMING UP. * > > > > *R5 ===> * > > *R5(config)#do show ip bgp sum* > > *BGP router identifier 200.0.0.5, local AS number 64513* > > *BGP table version is 1, main routing table version 1* > > * * > > *Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down > State/PfxRcd* > > *150.100.100.2 4 64512 7 6 1 0 0 00:04:25 > 0* > > *150.100.100.6 4 64514 0 0 0 0 0 never > Active*** > > * * > > *R6====>* > > *R6(config-router)#do show ip bgp sum* > > *BGP router identifier 200.0.0.6, local AS number 64514* > > *BGP table version is 1, main routing table version 1* > > * * > > *Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down > State/PfxRcd* > > *150.100.100.5 4 64513 0 0 0 0 0 never > Active*** > > * * > > * * > > > > *R5====> * > > *R5(config)#do show run | sec router bgp* > > *router bgp 64513* > > * no synchronization* > > * bgp log-neighbor-changes* > > * bgp confederation identifier 109* > > * bgp confederation peers 64512 64514 * > > * neighbor 150.100.100.2 remote-as 64512* > > * neighbor 150.100.100.6 remote-as 64514* > > * no auto-summary* > > * * > > * * > > *R6====> * > > *R6(config-router)#do show run | sec router bgp * > > *router bgp 64514* > > * no synchronization* > > * bgp log-neighbor-changes* > > * bgp confederation identifier 109* > > * bgp confederation peers 64512 64513 * > > * neighbor 150.100.100.5 remote-as 64513* > > * no auto-summary* > > * * > > * * > > *R6(config-router)#do ping 150.100.100.5* > > * * > > *Type escape sequence to abort.* > > *Sending 5, 100-byte ICMP Echos to 150.100.100.5, timeout is 2 seconds:* > > *!!!!!* > > * * > > * * > > *R5(config)#do ping 150.100.100.6* > > * * > > *Type escape sequence to abort.* > > *Sending 5, 100-byte ICMP Echos to 150.100.100.6, timeout is 2 seconds:* > > *!!!!!* > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
