Marko, Quick question. In your Labs, whenever you have a choice between BSR and Auto-RPyou select BSR and state that "BSR requires less configuration"
I know that Auto-RP requires this: ip pim autorp listeneronly if the Router is not in sparse-dense-mode But other than that, what additional configuration is required for Auto-RPother than the basic commands: - ip pim send-rp-announce <source-int> ... (RP Router) - ip pim send-rp-discovery scope <TTL> (Mapping Agent) I mean, BSR also requires 2 configuration commands: - ip pim bsr-candidate <int> <hash#> <priority#> - ip pim rp-candidate <int> <TTL> [priority#] [group-list#] So what else would be needed for Auto-RP? I don't know much about Multicast, so I have to ask. Sorry about that. Thanks!! --- On Fri, 1/14/11, Marko Milivojevic <[email protected]> wrote: From: Marko Milivojevic <[email protected]> Subject: Re: [OSL | CCIE_RS] Switches in Troubleshooting To: "Natraj Babaria" <[email protected]> Cc: "Antonio Soares" <[email protected]>, "GS CCIE" <[email protected]>, "OSL Routing and Switching" <[email protected]> Date: Friday, January 14, 2011, 9:50 AM On Fri, Jan 14, 2011 at 14:46, Natraj Babaria <[email protected]> wrote: > Hello , > I am going on monday itself ?? is this true ??? It's on Learning Network website. If you are ready for the exam, this should be of NO CONCERN to you. You are an expert and you know this stuff. -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: [email protected] Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
