Thanks Steve, Neil
-----Original Message----- From: Di Bias, Steve [mailto:[email protected]] Sent: 27 January 2011 14:56 To: O'Brien, Neil; [email protected] Subject: Re: [OSL | CCIE_RS] BLS and GNS3 You will needto manually edit the configs to fit (e.g. interfaces, etc) its a bit of a pain but once you do that you're good to go "O'Brien, Neil" <[email protected]> wrote: Hi Guys, I have the BLS V4 package and I have also downloaded the "Dynamips support files" from the blog. I haven't really started using any of the labs from BLS, I'm just preparing. Am I supposed to have initial configs for the devices in the topology and if so where do I get them. I did download some configs from my members area but they don't seem to transfer directly over to the devices in the GNS3 support files. Am I missing something?? Thanks in advance, Neil _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
