Also, just to follow-up on your question #3. DLCI mapping is documented on our physical topology diagram, which you can see here:
https://proctorlabs.com/PDF/2010/Routing_and_Switching.pdf -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: [email protected] Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Wed, Mar 2, 2011 at 04:14, Alef <[email protected]> wrote: > Gotcha, thanks for that. > as for 1, it seemed i couldn't create a subinterface when in regular > interface mode, maybe i made a typo. > > thanks! > On 2 Mar 2011, at 12:11, Jay Taylor wrote: > > > 1. Yes they can. > > > > 2. In the real lab you don't have access to BB routers. > > > > 3. R2, R4, R5 and R6 all have 3 FR DLCI's to one another. First number is > the source router, last number is the destination router and in the middle > is 0,1 or 2. > > > > Ex: R2 to R4 - 204, 214 and 224 > > > > > > On Wed, Mar 2, 2011 at 4:04 AM, Alef <[email protected]> wrote: > > 1. can subinterfaces not be configured from when in regular interface > configuration mode? > > 2. i thought we did not have access to backbone devices but we can (and > have to?) (the BB devices) > > 3. what is the structure for the DLCI numbers to the routers, i think i > saw it explained somewhere but cannot find it anymore. When i do a sh frame > map i don't see any maps and when i configure the PVC it says it's already > configured? > > > > apologies for any beginner questions, > > Kind regards, > > Alef > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
