I have a pretty limited set of commands under tag switching: R6(config-if)#tag-switching ? ip Configure IP dynamic Tag Switching mtu Set tag switching Maximum Transmission Unit
R6(config)#tag-switching ? advertise-tags Tag advertisements atm Configure ATM tagging options ip Dynamic tag switching for IP request-tags Specify valid downstream on demand destinations. tag-range Tag range tdp Tag Distribution Protocol R6(config)#tag-switching ip ? default-route Allow Tag Switching for ip default route propagate-ttl Propagate IP TTL into the tag stack <cr> On Sun, Mar 27, 2011 at 10:36 PM, Matt Hill <[email protected]> wrote: > I cant test this as I havent got a box in front of me to try.. > > However can you find anything under tag-switching as opposed to mpls? > That's the first place to look if something isnt there. > > Cheers, > Matt > > CCIE #22386 > CCSI #31207 > > On 28 March 2011 14:01, Rob Pool <[email protected]> wrote: >> I ran into the same exact task today and if I"m understanding correctly, our >> routers aren't at a new enough code release. I"m running Version 12.4(11)T. I >> copied the info below from the command reference. If I"m incorrect please >> let me >> know. Thanks. >> >> 12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T. >> >> 12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T. >> 12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T. >> 12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T. >> >> 12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T. >> >> >> >> >> >> >> ________________________________ >> From: marc abel <[email protected]> >> To: [email protected] >> Sent: Sun, March 27, 2011 10:31:35 PM >> Subject: [OSL | CCIE_RS] MPLS LDP PASSWORD OPTION >> >> Working through Vol 3 lab 1 and task 2.5 shows them enter the command >> >> mpls ldp password option 1 for 6 cisco >> >> on my router I can't seem to enter that command >> >> >> Version 12.4(15)T14 >> >> R6(config)#mpls ldp ? >> advertise-labels Label advertisements >> atm Configure ATM MPLS options >> backoff Set LDP session backoff parameters >> discovery LDP discovery >> explicit-null Advertise Explicit Null label in place of Implicit Null >> graceful-restart Configure LDP Graceful Restart >> holdtime LDP session holdtime >> igp Configure IGP-related LDP parameters >> logging Enable LDP logging >> loop-detection Enable LDP Loop Detection >> maxhops Limit hop count for LDP LSP setup >> neighbor Configure neighbor parameters >> path-vector Path Vector for LDP LSP setup >> request-labels Access list to specify valid downstream on demand >> destinations. >> router-id Select interface to prefer for LDP identifier address >> session Configure session parameters >> tcp Set TCP parameters for LDP >> >> >> The doc cd shows it as a valid command. Any ideas? >> >> Thanks, >> >> Marc >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit >> www.ipexpert.com >> >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
