Hello everyone
This is officially my first post
I was working with the lab 8 of volume 2, while I having a
problem with nat, I have tried both either route-map and
access-list
R9 does work correctly. however not by the various CAT.
Of course, ping the broadcast. As you can see access-list is
matched, I checked the flow-verse of the nat, but nothing to do.
Obviosly each ping with source Loopback1 does work, therefore
I've route back.
Can someone help me?
Straighforward essential configuration:
IPeR9#sh runn | i nat
ip nat outside
ip nat inside
ip nat inside source route-map nat interface Loopback1 overload
route-map nat permit 10
IPeR9#sh route
route-map nat, permit, sequence 10
Match clauses:
ip address (access-lists): 90
Set clauses:
Policy routing matches: 0 packets, 0 bytes
IPeR9#sh access-l 90
Standard IP access list 90
10 permit 10.0.0.0, wildcard bits 0.255.255.255 (51 matches)
--
This message is intended for the individual(s) to whom it is addressed and may
contain information that is privileged or confidential.
If you are not the addressee you must not read,use or disclose the contents of
this email.
Whilst all reasonable care has been taken to avoid the transmission of viruses,
the recipient should carry out virus and other checks,
as they consider appropriate.
Myself accepts no responsibility in this regard.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
