Iam working on Cisco 3750 routers running Version 12.4(15)T14,
I have no mdt address-family under bgp…! R2(config-router)#address-family ? ipv4 Address family ipv6 Address family nsap Address family vpnv4 Address family The pings work and the multicast is working and tunnels seem to come up…. R6#show derived-config int tun0 Building configuration... Derived configuration : 168 bytes ! interface Tunnel0 ip vrf forwarding VPNB ip unnumbered Loopback0 ip mtu 1500 ip pim sparse-dense-mode tunnel source Loopback0 tunnel destination 239.1.1.2 end I have mdt routes... R2#show ip pim mdt bgp Peer (Route Distinguisher + IPv4) Next Hop MDT group 239.1.1.2 2:256:2:200.0.0.5 200.0.0.5 2:256:2:200.0.0.6 200.0.0.6 MDT group 239.1.1.1 2:256:1:200.0.0.5 200.0.0.5 R2#show ip pim mdt bgp Peer (Route Distinguisher + IPv4) Next Hop MDT group 239.1.1.2 2:256:2:200.0.0.5 200.0.0.5 2:256:2:200.0.0.6 200.0.0.6 MDT group 239.1.1.1 2:256:1:200.0.0.5 200.0.0.5 Whats up with this? _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
