I'm thinking 3 dude, just config and apply to your frame interfaces towards vlan 70
Aaron Moreck <[email protected]> wrote: Task 3.2 asks us to use PPP encapsulation on the s0/2/0 interfaces between R2 and R5 Task 3.4 tells us on R2 to set the DE bit on ANY non-intial fragmented ICMP packets going out to VLAN70 The task itself is easy however its a wording The IGP / BGP section is not compelte yet there for the path to VLAN 70 may go over the frame or over the PPP link to R5. Cant set DE bit on the PPP link Options the way i see it 1.) Convert PPP between R2 and R6 to PPPoFR and apply the frame map to achive results 2.) Modify IGP /BGP so that path to VLAN 70 always uses frame interface 3.) I am reading into this too much and only need to set DE on existing FR interface #2 is quicker but in my mind #1 is "more correct" _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
