EDIt- HQ has one packet place empty, 1(2). sorry for ambiguity in the statement.
On Thu, Jul 28, 2011 at 7:03 PM, gaurav nunia <[email protected]>wrote: > Thanks, > > so that means, we do the queuing actions only on the packets overflowing > the hardware Q, > > one more doubt :) > what happens when the HQ has only one packet in the Q, and transmit Q is > 1(2). and then occurs a arrival of really big packet. > if LFI is being used, will the packet be fragmented, and the following > small voice packet, be allowed to pass swiftly.? > > On Thu, Jul 28, 2011 at 6:53 PM, Anthony Sequeira < > [email protected]> wrote: > >> http://stormwindlive.com/blog/?p=179 >> >> -----Original Message----- >> From: [email protected] [mailto: >> [email protected]] On Behalf Of gaurav nunia >> Sent: Thursday, July 28, 2011 9:02 AM >> To: [email protected] >> Subject: [OSL | CCIE_RS] QOS-basic hrdware Q >> >> if wrong please correct the following? >> >> 1 the hardware Q is always, FIFO, >> 2. when ever the HArdware Q is empty, or long enough that it seldom fills( >> i change the default from 2 to little high after configuring queuing), then >> the Queuing can't be feasible as hardware Q don't get filled up, and >> everypacket goes to it (although queuing is configured). >> >> if the 2nd statement is true, do the subinterface queues too behave in the >> same manner. >> >> -- >> thanks >> gaurav >> >> <http://routing0sand1s.blogspot.com/> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > > > -- > thanks > gaurav > > <http://routing0sand1s.blogspot.com/> > > -- thanks gaurav http://routing0sand1s.blogspot.com/ _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
