Hi,
I just completed redistribution and I cannot ping from R4 to R1. I can ping
from R1 to R4.
Any ideas on what to look at? Thanks in advance!
R4#sh ip route 10.10.10.1
Routing entry for 10.10.10.1/32
Known via "eigrp 20", distance 170, metric 2560512256
Tag 85, type external
Redistributing via eigrp 20
Last update from 216.30.1.6 on Serial0/0/0, 00:04:44 ago
Routing Descriptor Blocks:
216.30.1.6, from 216.30.1.6, 00:04:44 ago, via Serial0/0/0
Route metric is 2560512256, traffic share count is 1
Total delay is 20010 microseconds, minimum bandwidth is 1 Kbit
Reliability 1/255, minimum MTU 1 bytes
Loading 1/255, Hops 1
Route tag 85
* 216.30.1.5, from 216.30.1.5, 00:04:44 ago, via Serial0/0/0
Route metric is 2560512256, traffic share count is 1
Total delay is 20010 microseconds, minimum bandwidth is 1 Kbit
Reliability 1/255, minimum MTU 1 bytes
Loading 1/255, Hops 1
Route tag 85
R4#ping 216.30.1.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 216.30.1.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/31/32 ms
R4#ping 10.10.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R4#traceroute 10.10.10.1
Type escape sequence to abort.
Tracing the route to 10.10.10.1
1 216.30.1.5 16 msec
216.30.1.6 8 msec
216.30.1.5 16 msec
2 216.30.100.5 16 msec
216.30.25.2 16 msec
216.30.100.5 12 msec
3
*Aug 8 22:39:24.747: ICMP: time exceeded rcvd from 216.30.1.5
*Aug 8 22:39:24.755: ICMP: time exceeded rcvd from 216.30.1.6
*Aug 8 22:39:24.771: ICMP: time exceeded rcvd from 216.30.1.5
*Aug 8 22:39:24.787: ICMP: time exceeded rcvd from 216.30.100.5
*Aug 8 22:39:24.803: ICMP: time exceeded rcvd from 216.30.25.2
*Aug 8 22:39:24.815: ICMP: time exceeded rcvd from 216.30.100.5 *
216.30.25.2 12 msec
*Aug 8 22:39:27.827: ICMP: time exceeded rcvd from 216.30.25.2 *
4 * * *
R4#ping 10.10.10.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/24/24 ms
R4#
R4#traceroute 10.10.10.2
Type escape sequence to abort.
Tracing the route to 10.10.10.2
1 216.30.1.6 12 msec
216.30.1.5 16 msec
216.30.1.6 8 msec
2 216.30.25.2 16 msec
216.30.100.5 12 msec *
R4#
R1#sh ip route 10.10.10.4
Routing entry for 10.10.10.4/32
Known via "ospf 12", distance 110, metric 20
Tag 85, type extern 2, forward metric 1
Last update from 216.30.2.2 on FastEthernet0/0, 00:08:46 ago
Routing Descriptor Blocks:
* 216.30.2.2, from 10.10.10.2, 00:08:46 ago, via FastEthernet0/0
Route metric is 20, traffic share count is 1
Route tag 85
R1#ping 10.10.10.4
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/25/28 ms
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
