i'm trying to work on MFR using GNS IOS c7200p-adventerprisek9-mz[1].124-24.T
but the command does not seem to work. I also tried to work it on back to back FR- to no avail.. http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/17s_mfr.html http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/dmfr.html I did some reading on Cisco Website and this commands are router specific 10000,12000 and some 5000 Router(config)# *interface mfr* *number* ** 7500 series router with a VIP2-50 or greater This feature works on the following port adapters: –PA-MC-T3 –PA-MC-2T3+ –PA-MC-E3 –PA-MC-2E1 –PA-MC-2T1 –PA-MC-4T1 –PA-MC-8T1 –PA-MC-8E1 –PA-MC-STM-1 –PA-MC-8TE1+ –PA-4T+ –PA-8T am I doing any thing wrong. thanks Melwin _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
