I have a hard time keeping some of the spanning-tree options straight, and would like to clarify that my current understanding is correct.
You can configure portfast globally or per interface. These seem to be functionally identical, is this correct? So if my lab were to say make sure that all links begin forwarding immediately then it would save time to configure globally correct? Is this what you guys do? You can configure BPDU guard globally or per interface. The differences are that globally it only works for port-fast enabled ports, but when configured on the interface it is on unconditionally, correct? What language might lead you to choose one over the other? You can configure BPDU filter globally or per interface. The difference is that globally it only works for port-fast enabled ports, and it still sends a few bpdu's on startup. Configured locally it unconditionally enables on the port and it sends no BPDU's, correct? So I can see a scenario were they ask that NO bpdu's are sent or recieved, in this case you would have to configure on the port right? What language might they use if they wanted you to configure globally? I understand that functionally enabling bpdu filtering is the same as disabling spanning-tree on the port, something to watch out for. Also if anyone can provide further clarification on loopgaurd I would appreciate it. I read the sectio in the 3560 config guide but it still doesn't make sense to me, Thank you, Marc _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
