Bob

2) Don't even configure it at layer three. Make the VLAN and add a
description, for example UNUSED_PORTS, shut it down and configure
unnassigned ports to that VLAN in access mode and shut them down. Document
it like you would other procedures you use for templating or setting up
your network devices and make sure any new network admins go through the
documentation before they start working on network devices.

Les

On Fri, Nov 25, 2011 at 9:28 PM, Bob McCouch <[email protected]> wrote:

> Hi Experts,
>
> I know this mailing list is for IPExpert materials discussions but I'm
> going to abuse it just a touch to get some best practice input from a
> collection of seasoned engineers. I am always on the fence about how to
> treat unrouted L2 VLANs that exist on an L3 switch, like a guest network
> that is being piped up to a firewall or a (gasp) DMZ that is running as a
> VLAN on the internal network, or just a voice VLAN that is gatewayed by
> another device. Here are the two positions I float between:
>
> 1) Create the SVI (interface VlanX), no ip address, shutdown, put a
> description that warns not to activate the SVI.
> 2) Ignore it at L3 completely and don't even instantiate the SVI.
>
> The argument for #1 goes that by creating the interface put purposely
> shutting it and adding description, you're hopefully less likely to have
> someone else accidentally enable routing on that interface one day thinking
> they're taking care of something that got missed. Actively document the
> designed behavior rather than just leave a questionable absence of
> configuration. The argument for #2 says completely ignore this VLAN and
> don't even let the routing engine "listen" in any fashion to it.
>
> Anyone know of any actual security/architecture best practices on this, or
> is there a common opinion on this?
>
> Thanks!
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
> To Unsubscribe from this list please visit the following link and follow
> the directions to unsubscribe.
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>



-- 
Les Waller, Network Engineer

Home Page:  www.leswaller.com

MBA, CISSP, CCNP
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

To Unsubscribe from this list please visit the following link and follow the 
directions to unsubscribe. http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to