Hey Chris that's a good question, where is 220.1? I'm certain I configured it. Oh well thanks for your response! On Dec 1, 2011 3:17 AM, "Christophe Lemaire" < [email protected]> wrote:
> Hi Steve, > > That how I did it as well. Having a secondary IP does not mean a second > group for me. :-) > > But it was a long time ago... Is there a reason for not have 150.100.220.1 > on R5, I can't remember? > > Regards, > Christophe > > On 30 Nov 2011, at 01:30, Di Bias, Steve wrote: > > > Ahoy Lads! > > > > On Lab 19 Task 19.8 tells us to configure some secondary IP's on the > VLAN 567 interfaces of R5, R6, and R7 with secondary HSRP groups. > > > > On this attempt I used the "secondary" keyword within the same standby > group number as opposed to using a separate group. Everything seems to work > just fine, just want some assurance as to if my configs are good or not. > > > > Do I get the points? > > > > Thanks! > > > > R5 > > > > interface FastEthernet0/0 > > ip address 150.100.222.5 255.255.255.0 secondary > > ip address 150.100.220.5 255.255.255.0 > > standby version 2 > > standby 1 ip 150.100.222.10 secondary > > standby 1 preempt > > standby 1 authentication md5 key-string 7 046B0A050400585A081A0E > > > > R6 > > > > interface FastEthernet0/0 > > ip address 150.100.222.6 255.255.255.0 secondary > > ip address 150.100.220.6 255.255.255.0 > > standby version 2 > > standby 1 ip 150.100.220.1 > > standby 1 ip 150.100.222.10 secondary > > standby 1 timers 20 60 > > standby 1 priority 110 > > standby 1 preempt delay minimum 60 > > standby 1 authentication md5 key-string 7 107E081A0E36061F0D0721 > > standby 1 track 1 decrement 15 > > standby 1 track 2 decrement 15 > > > > R7 > > > > interface FastEthernet0/0 > > ip address 150.100.222.7 255.255.255.0 secondary > > ip address 150.100.220.7 255.255.255.0 > > standby version 2 > > standby 1 ip 150.100.220.1 > > standby 1 ip 150.100.222.10 secondary > > standby 1 timers 20 60 > > standby 1 preempt > > standby 1 authentication md5 key-string 7 046B0A050400585A081A0E > > > > > > Show commands below: > > > > > > R5(config-if)#do sh stand > > FastEthernet0/0 - Group 1 (version 2) > > State is Learn > > 3 state changes, last state change 00:08:26 > > Virtual IP address is unknown > > Secondary virtual IP address 150.100.222.10 > > Active virtual MAC address is 0000.0c9f.f001 > > Local virtual MAC address is 0000.0c9f.f001 (v2 default) > > Hello time 20 sec, hold time 60 sec > > Authentication MD5, key-string > > Preemption enabled > > Active router is 150.100.220.6, priority 110 (expires in 47.536 sec) > > MAC address is e804.6224.d2a8 > > Standby router is 150.100.220.7, priority 100 (expires in 58.224 sec) > > Priority 100 (default 100) > > Group name is "hsrp-Fa0/0-1" (default) > > > > > > R6(config-if)#do sh stand > > FastEthernet0/0 - Group 1 (version 2) > > State is Active > > 8 state changes, last state change 00:19:54 > > Virtual IP address is 150.100.220.1 > > Secondary virtual IP address 150.100.222.10 > > Active virtual MAC address is 0000.0c9f.f001 > > Local virtual MAC address is 0000.0c9f.f001 (v2 default) > > Hello time 20 sec, hold time 60 sec > > Next hello sent in 10.016 secs > > Authentication MD5, key-string > > Preemption enabled, delay min 60 secs > > Active router is local > > Standby router is 150.100.220.7, priority 100 (expires in 57.392 sec) > > Priority 110 (configured 110) > > Track object 1 state Up decrement 15 > > Track object 2 state Up decrement 15 > > Group name is "hsrp-Fa0/0-1" (default) > > > > > > R7(config-if)#do sh stand > > FastEthernet0/0 - Group 1 (version 2) > > State is Standby > > 10 state changes, last state change 00:19:25 > > Virtual IP address is 150.100.220.1 > > Secondary virtual IP address 150.100.222.10 > > Active virtual MAC address is 0000.0c9f.f001 > > Local virtual MAC address is 0000.0c9f.f001 (v2 default) > > Hello time 20 sec, hold time 60 sec > > Next hello sent in 8.320 secs > > Authentication MD5, key-string > > Preemption enabled > > Active router is 150.100.220.6, priority 110 (expires in 57.776 sec) > > MAC address is e804.6224.d2a8 > > Standby router is local > > Priority 100 (default 100) > > Group name is "hsrp-Fa0/0-1" (default) > > > > > > //Steve > > > > > > > > > > UHS Confidentiality Notice: This e-mail message, including any > attachments, is for the sole use of the intended recipient (s) and may > contain confidential and privileged information. Any unauthorized review, > use, disclosure or distribution of this information is prohibited. If this > was sent to you in error, please notify the sender by reply e-mail and > destroy all copies of the original message. > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > > To Unsubscribe from this list please visit the following link and follow > the directions to unsubscribe. > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
