Hi Guys, Thanks so much friends I've got it worked :) the reason of my problem I forgot to to wirte #no passive-interface s0/2 - on the routing statement of R2.
thanks to you all On Mon, Jan 16, 2012 at 12:22 PM, Nandan Mathure <[email protected]> wrote: > Hi! > > I think this might be related to feasibility condition not being met. So > do you see it when you type "show ip eigrp topology all-links" ? > I will suggest change the delay on int s0/2 by giving "delay 1" command. > > Kind Regards, > Nandan > > > On Mon, Jan 16, 2012 at 2:44 PM, Marcin Krupinski < > [email protected]> wrote: > >> hey, >> >> show me >> >> #show cdp nei >> #show ip eigrp interfaces >> #show run int s0/2 >> >> regards, >> Marcin >> >> 2012/1/16 khaled al-ajeman <[email protected]> >> >> > Hi Guys, >> > >> > can anyone of you explain to me please why I could not see the both >> serial >> > interfaces of R5, even thought I have connected the both interfaces in >> the >> > topology diagram ? >> > However, there are only one serial interface is available to me to see >> as >> > follows: >> > >> > R5(config-if)#do sh ip ei top 100.100.100.0/24 >> > IP-EIGRP (AS 1001): Topology entry for 100.100.100.0/24 >> > State is Passive, Query origin flag is 1, 1 Successor(s), FD is 819200 >> > Routing Descriptor Blocks: >> > 150.100.100.2 (Serial0/0.56), from 150.100.100.2, Send flag is 0x0 >> > Composite metric is (819200/307200), Route is Internal >> > Vector metric: >> > Minimum bandwidth is 10000 Kbit >> > Total delay is 22000 microseconds >> > Reliability is 255/255 >> > Load is 1/255 >> > Minimum MTU is 1500 >> > Hop count is 2 >> > As a matter of fact all my serial interface are up and running fine. >> > >> > my configurations are: >> > router eigrp 1001 >> > variance 2 >> > redistribute connected metric 1 1 1 1 1 route-map eigrp-connected >> > passive-interface default >> > no passive-interface FastEthernet0/0 >> > no passive-interface Serial0/0.56 --------- only this interface is >> > available to see when I typed #sh ip ei top 100.100.100.0/24 >> > no passive-interface FastEthernet0/1 >> > no passive-interface Serial0/2 --------- This interface is not >> > available to see when I typed #sh ip ei top 100.100.100.0/24 ----- can >> > anyone explain to me why this interface is no showing? >> > network 150.100.25.0 0.0.0.255 >> > network 150.100.100.0 0.0.0.255 >> > network 150.100.220.0 0.0.0.255 >> > network 150.100.221.0 0.0.0.255 >> > no auto-summary >> > thanks, >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> > >> > http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
