All, Can some explain what's hte idfference between -
Step 3 Prefer the path that was locally originated via a *network* or *aggregate*BGP subcommand or through redistribution from an IGP. Local paths that are sourced by the *network*<http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800c95bb.shtml#networkcommand>or *redistribute* commands are preferred over local aggregates that are sourced by the *aggregate-address*<http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094826.shtml>command. and Step 5 Prefer the path with the lowest origin type. *Note: *IGP is lower than Exterior Gateway Protocol (EGP), and EGP is lower than INCOMPLETE. They both read the same to me and I cant get my head around it. Thanks Bal _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
