show vlan brief.. to see if the vlan it's up not the L3 vlan assigned to an interface.
greetings On Thu, Mar 1, 2012 at 9:56 AM, Bob McCouch <[email protected]> wrote: > Did you create VLAN 10 on each device? Modern switch code will > automatically create the VLAN when you assign an access port to it, > but if I recall correctly setting a trunk native does not create the > VLAN on its own. > > Also, if you have interface F1/X and a .net file, you are talking > about a 3725 or 3745 in Dynamips, not a 3750. Very different, and the > IOS switches definitely need the VLAN to be created before its > assigned. > > Bob > -- > Sent from my iPhone, please excuse any typos. > > On Mar 1, 2012, at 6:07 AM, Waleed Alsherif <[email protected]> wrote: > > > I missed , typing mistake > > > > On SW1: > > # ping 10.10.10.2 > > . . . . . > > Packet sent with a source address of 10.10.10.2 > > > > > > Best Regards > > Waleed Abdulfattah Alsherif > > IP and Data Network Engineer > > CCIE RS (Written) / CCNP / CCNA > > Mob. 002-01019556246 > > > > > > ________________________________ > > From: Steve Storniak <[email protected]> > > To: "ccie_rs@onlinestudylist com" <[email protected]>; > "waleed_ccie@yahoo com" <[email protected]> > > Sent: Thursday, March 1, 2012 11:55 AM > > Subject: Re: [OSL | CCIE_RS] GNS3 ( 3750 - 3750 ) vlan interface is not > working > > > > > > So SW1 is not pinging himself? What Ios code are you using? > > > > > > > > Sent from Yahoo! Mail on Android > > > > > > > > ________________________________ > > From: Waleed Alsherif <[email protected]>; > > To: CCIE OSL <[email protected]>; > > Subject: [OSL | CCIE_RS] GNS3 ( 3750 - 3750 ) vlan interface is not > working > > Sent: Thu, Mar 1, 2012 9:02:25 AM > > > > > > Hi all, > > > > I have connected two devices 3750 ( SW1 & SW2 ) as below but it seems > that vlan interface is not working , it is not pinging the other side. > > > > I have attached the .net file > > > > > > on SW1: > > int vlan 10 > > ip add 10.10.10.1 255.255.255.0 > > > > int f1/13 > > switchport trunk encapsulation dot1q > > switchport mode trunk > > > > switchport trunk native vlan 10 > > > > > > > > on SW2: > > > > int vlan 10 > > ip add 10.10.10.2 255.255.255.0 > > > > int f1/13 > > switchport trunk encapsulation dot1q > > switchport mode trunk > > switchport trunk native vlan 10 > > > > > > ___________________ > > > > On SW1: > > # ping 10.10.10.1 > > . . . . . > > Packet sent with a source address of 10.10.10.1 > > > > > > Guy , any idea ? > > > > > > > > Best Regards > > Waleed Abdulfattah Alsherif > > IP > > and Data Network Engineer > > CCIE RS (Written) / CCNP / CCNA > > Mob. 002-01019556246 > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- Edgar Díaz Orellana CCENT/CCNA/CCNA Security, CCNP en progreso, CCSP pausado. Kaspersky Administrator / Technical Specialist Microsoft Certified Professional. Celular : 09-94118996 skype: eorellan1969 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
