On 4/18/2012 12:13 PM, Marko Milivojevic wrote:
If the lab says 1:17, it needs to be 1:17. You may need to play around
with the metrics a little bit to get it working.
--
Marko Milivojevic - CCIE #18427 (SP R&S)
Senior CCIE Instructor - IPexpert
On Wed, Apr 18, 2012 at 08:38, Vijaya Laxmi<[email protected]> wrote:
Hello all,
I need to get traffic share count to look like 1:17
*My question is : *If it is ACCEPTABLE to achieve traffic ratio *CLOSE *to
1:17 as below [120/7 = 17.14 which is close to 17 ] or ONLY 1:17 will be
accepted.
R2(config-if)#do sh ip route 100.100.128.160
Routing entry for 100.100.128.160/24
Known via "eigrp 100", distance 90, metric 281856, type internal
Redistributing via eigrp 100
Last update from 100.100.128.134 on Ethernet0/1, 00:00:01 ago
Routing Descriptor Blocks:
100.100.128.134, from 100.100.128.134, 00:00:01 ago, via Ethernet0/1
Route metric is 5005056, *traffic share count is 7*
Total delay is 185510 microseconds, minimum bandwidth is 10000 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 1
* 100.100.128.124, from 100.100.128.124, 00:00:01 ago, via Ethernet0/0
Route metric is 281856,*traffic share count is 120*
Total delay is 1010 microseconds, minimum bandwidth is 10000 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 1
Regards
Vijaya
_______________________________________________
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
Understood.. Thanks Marko !
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
