Hi Guys, I have two qustions at lab1 workbook2:First, EIGRP routing porcess
should use 40% bandwidth between the tow routers ?R6-R9 connected through
MLPPP,why we put the bandwidth to 1000 in the solution guide ?
Second, we need to configure Custom queueing
Queue 1 pkt count 100
Queue 2 pkt count 90
Queue 3 pkt count 80
Queue 4 pkt count 70
Queue 5 pkt count 60
Queue 6 pkt count 50In the solution guide,the answer is like
queue-list 1 queue 1 byte-count 1000 limit 100
queue-list 1 queue 2 byte-count 900 limit 90
queue-list 1 queue 3 byte-count 800 limit 80
queue-list 1 queue 4 byte-count 700 limit 70
queue-list 1 queue 5 byte-count 600 limit 60
queue-list 1 queue 6 byte-count 500 limit 50
Guys,why the mentioned the byte-count and based on what the configure it ?
in Cisco-doc,we can configure
queue-list 1 queue 1 limit 100 and so on..
any ideas/suggestions will higly appreciated.
sorry for mention alot of details :( Thanks all :)
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
