Hi Experts, This question is slightly different
The topology is like this with all ethernet links R1<---Area0--->R2<---Area1-->R3<---Area2--->R4 When I check the neighborship of R3 and R4 , the neighborship is fine R3#sh ip ospf nei Neighbor ID Pri State Dead Time Address Interface 10.1.1.2 1 FULL/DR 00:00:33 20.1.1.1 Ethernet1/1 30.1.1.2 1 FULL/DR 00:00:38 30.1.1.2 Ethernet1/0 R3# In R4 also the neighborship is fine R4#sh ip ospf nei Neighbor ID Pri State Dead Time Address Interface 20.1.1.2 1 FULL/BDR 00:00:35 30.1.1.1 Ethernet1/0 R4# *If the neigborship is fine , why are the routes not being exchanged ?* *R4 routing table contains only the directly connected routes .* PS: I know about the A0 and the normal ospf design, i just want to know why this does not work . -- Regards Mohamed Shakeeb _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
