Hi GuysI have this question from the WB VOL2 Lab 3 (Task 8.1)
Configure queue for traffic flowing over serial.. Ftp traffic use 20%
HTTP traffic use 20%
IPV6 traffic use 25%
TELNET traffic use 15% IN the DSG, they ansewerd it PQ, but don't know how they
put byte-countFTP 20% = 2000 byte-count
HTTP 20% = 2000
IPV6 25% = 2500
TELNET 15% they mention because the packet size is small, we should increase
the queue limit ! The answer like this: Queue 1 byte-count 2000
queue 2 byte-count 2000
queue 3 byte-count 2500
queue 5 byte-count 2000 ------ this is for default traffic
queue 4 limit 50 -------- this is for telnet My questions are:20% HTTP
20% FTP
25% IPV6
15% Telnet
20% default -I know that by default 75% we can reserve for QOS ( but its
tewakable), should we put it 100% in this
example ?max-reserve band 100 -Is there difference between the packet size of
the type of traffic (telnet traffic) ? 1500 the packet size right by defautl ?
-If we need to do it by MQC/CBWFQ
in the map-class, can we put for http class for example
bandwidth percent 20 % OR bandwidth (20% * interface bandwidth) ? Any answer
will be highly appreciated guys,sorry for this long question !!Thanks in
advance :))
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
