John,
I am working on GNS3 topology and initial config and would be interested to
see spreadsheet that lists which interfaces go where so that I can verify my
work. I can also share my .net file.
I have been also experimenting on LAB13 and everything seems to be working
fine.
About vlan database - You are right. I have to reenter vlan database every time
I reload my routers with NM16ESW
My goal is to use one .net file for all Volume 1 labs if possible.
Here is my .net file
autostart = False
version = 0.8.3
[127.0.0.1:7202]
workingdir = C:\Users\Lashari\AppData\Local\Temp
udp = 10200
[[3725]]
image = C:\GNS3-IOS\c3725-adventerprisek9-mz.124-25d.image
ram = 128
idlepc = 0x612319d0
sparsemem = True
ghostios = True
[[ROUTER R1]]
model = 3725
console = 2017
aux = 2517
cnfg = configs\R1.cfg
f0/0 = Cat1 f1/1
f0/1 = Cat2 f1/1
slot1 = NM-1FE-TX
slot2 = NM-1FE-TX
x = -490.0
y = -422.0
z = 1.0
[[ROUTER BB3]]
model = 3725
console = 2014
aux = 2514
cnfg = configs\BB3.cfg
f0/0 = Cat3 f1/13
x = 160.0
y = 164.0
z = 1.0
[[ROUTER BB2]]
model = 3725
console = 2012
aux = 2512
cnfg = configs\BB2.cfg
f0/0 = Cat2 f1/12
x = 183.0
y = 10.0
z = 1.0
[[ROUTER BB1]]
model = 3725
console = 2010
aux = 2510
cnfg = configs\BB1.cfg
f0/0 = Cat1 f1/11
x = 315.0
y = -60.0
z = 1.0
[127.0.0.1:7203]
workingdir = C:\Users\Lashari\AppData\Local\Temp
udp = 10300
[[3725]]
image = C:\GNS3-IOS\c3725-adventerprisek9-mz.124-25d.image
ram = 256
idlepc = 0x612319d0
sparsemem = True
ghostios = True
[[ROUTER Cat1]]
model = 3725
console = 2019
aux = 2519
cnfg = configs\Cat1.cfg
slot1 = NM-16ESW
f1/0 = R2 f0/0
f1/1 = R1 f0/0
f1/2 = R2 f1/0
f1/4 = R4 f0/0
f1/5 = R5 f0/0
f1/11 = BB1 f0/0
slot2 = NM-16ESW
f2/0 = Cat2 f2/0
f2/9 = Cat4 f2/9
f2/10 = Cat4 f2/10
f2/11 = Cat3 f2/11
f2/12 = Cat3 f2/12
f2/13 = Cat2 f2/13
f2/14 = Cat2 f2/14
x = 236.899494937
y = -429.414213562
z = 1.0
[[ROUTER Cat2]]
model = 3725
console = 2021
aux = 2521
cnfg = configs\Cat2.cfg
slot1 = NM-16ESW
f1/1 = R1 f0/1
f1/9 = R8 f0/0
f1/12 = BB2 f0/0
slot2 = NM-16ESW
f2/0 = Cat1 f2/0
f2/9 = Cat3 f2/9
f2/10 = Cat3 f2/10
f2/11 = Cat4 f2/11
f2/12 = Cat4 f2/12
f2/13 = Cat1 f2/13
f2/14 = Cat1 f2/14
x = 427.798989873
y = -423.556349186
z = 1.0
[[ROUTER Cat3]]
model = 3725
console = 2020
aux = 2520
cnfg = configs\Cat3.cfg
slot1 = NM-16ESW
f1/2 = R2 f1/1
f1/4 = R4 f0/1
f1/5 = R5 f0/1
f1/6 = R6 f0/0
f1/7 = R7 f0/0
f1/13 = BB3 f0/0
slot2 = NM-16ESW
f2/9 = Cat2 f2/9
f2/10 = Cat2 f2/10
f2/11 = Cat1 f2/11
f2/12 = Cat1 f2/12
f2/13 = Cat4 f2/13
f2/14 = Cat4 f2/14
x = 237.485281374
y = -233.928932188
z = 1.0
[[ROUTER Cat4]]
model = 3725
console = 2022
aux = 2522
cnfg = configs\Cat4.cfg
slot1 = NM-16ESW
f1/6 = R6 f0/1
f1/7 = R7 f0/1
f1/9 = R8 f0/1
slot2 = NM-16ESW
f2/9 = Cat1 f2/9
f2/10 = Cat1 f2/10
f2/11 = Cat2 f2/11
f2/12 = Cat2 f2/12
f2/13 = Cat3 f2/13
f2/14 = Cat3 f2/14
x = 440.69848481
y = -231.757359313
z = 1.0
[127.0.0.1:7200]
workingdir = C:\Users\Lashari\AppData\Local\Temp
udp = 10000
[[3725]]
image = C:\GNS3-IOS\c3725-adventerprisek9-mz.124-25d.image
ram = 128
idlepc = 0x612319d0
sparsemem = True
ghostios = True
[[ROUTER R4]]
model = 3725
console = 2003
aux = 2503
cnfg = configs\R4.cfg
wic0/0 = WIC-2T
s0/0 = FRS s0/1
f0/0 = Cat1 f1/4
f0/1 = Cat3 f1/4
x = -518.0
y = -113.0
z = 1.0
[[ROUTER R5]]
model = 3725
console = 2005
aux = 2505
cnfg = configs\R5.cfg
wic0/0 = WIC-2T
wic0/1 = WIC-2T
s0/1 = FRS s0/3
s0/2 = R2 s0/2
f0/0 = Cat1 f1/5
f0/1 = Cat3 f1/5
x = -110.0
y = 153.0
z = 1.0
[[ROUTER R2]]
model = 3725
console = 2002
aux = 2502
cnfg = configs\R2.cfg
wic0/0 = WIC-2T
wic0/1 = WIC-2T
s0/1 = FRS s0/0
s0/2 = R5 s0/2
f0/0 = Cat1 f1/0
slot1 = NM-16ESW
f1/0 = Cat1 f1/2
f1/1 = Cat3 f1/2
x = -509.0
y = 143.0
z = 1.0
[[ROUTER FRS]]
model = 3725
console = 2001
aux = 2501
cnfg = configs\FRS.cfg
wic0/0 = WIC-2T
wic0/1 = WIC-2T
wic0/2 = WIC-2T
s0/0 = R2 s0/1
s0/1 = R4 s0/0
s0/2 = R6 s0/1
s0/3 = R5 s0/1
x = -311.0
y = -2.0
z = 1.0
[127.0.0.1:7201]
workingdir = C:\Users\Lashari\AppData\Local\Temp
udp = 10100
[[3725]]
image = C:\GNS3-IOS\c3725-adventerprisek9-mz.124-25d.image
ram = 128
idlepc = 0x612319d0
sparsemem = True
ghostios = True
[[ROUTER R6]]
model = 3725
console = 2006
aux = 2506
cnfg = configs\R6.cfg
wic0/0 = WIC-2T
wic0/1 = WIC-2T
s0/1 = FRS s0/2
s0/2 = R9 s0/2
s0/3 = R9 s0/3
f0/0 = Cat3 f1/6
f0/1 = Cat4 f1/6
x = -108.0
y = -94.0
z = 1.0
[[ROUTER R7]]
model = 3725
console = 2007
aux = 2507
cnfg = configs\R7.cfg
wic0/0 = WIC-2T
s0/0 = R8 s0/0
f0/0 = Cat3 f1/7
f0/1 = Cat4 f1/7
x = 533.0
y = -70.0
z = 1.0
[[ROUTER R8]]
model = 3725
console = 2008
aux = 2508
cnfg = configs\R8.cfg
wic0/0 = WIC-2T
s0/0 = R7 s0/0
f0/0 = Cat2 f1/9
f0/1 = Cat4 f1/9
x = 443.0
y = 180.0
z = 1.0
[[ROUTER R9]]
model = 3725
console = 2009
aux = 2509
cnfg = configs\R9.cfg
wic0/0 = WIC-2T
wic0/1 = WIC-2T
s0/2 = R6 s0/2
s0/3 = R6 s0/3
x = -101.857864376
y = -286.414213562
z = 1.0
[GNS3-DATA]
configs = configs
m11 = 0.707106781187
m22 = 0.707106781187
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of John Olsen
Sent: Thursday, August 09, 2012 5:34 AM
To: [email protected]
Subject: Re: [OSL | CCIE_RS] Initial Configs for GNS3
Hi Guys,
The script that Bob posted does all the necessary changes to the routers, or at
least tells you what to change manually. However it does not cover the CAT
switches. I have been experimenting with a set of configurations for them and
found that it all seems to be working for lab 13, eg the loopbacks on the cat
switches are being advertised where they should be. I think they will work for
labs like that, where the Cat switches are taking part in routing and providing
basic switch connectivity. I will tidy these up tomorrow and post them, along
with my spreadsheet that lists which interfaces go where so others can
experiment along the same lines.
One thing you have to do is reload the vlan database each time, these don't get
saved along with the configs. (Unless of course I am doing something wrong!)
regards
John
On 9/08/2012 6:54 p.m., Marko Milivojevic wrote:
> Josh,
>
> We don't have officially supported set of configuration files for
> GNS3, but if you do a quick search in OSL archives you'll find someone
> posted a conversion script two weeks ago, if I'm not much mistaken.
>
> --
> Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor -
> IPexpert
>
> On Wed, Aug 8, 2012 at 8:20 PM, Joshua Wood <[email protected]> wrote:
>> Hi all, does anyone have the workbook one initial configs that are
>> modified to work with the GNS3 topology that IPexpert has created so
>> that I can do the workbook 1 labs in GNS3 without the need to modify
>> them all? I would assume that someone has created these configs a
>> while ago and it would save me a good bit of time by not having to
>> modify them.
>>
>> Thanks,
>> Josh
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training,
>> please visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
******* CONFIDENTIALITY NOTICE *******
This e-mail message and all attachments transmitted with it may
contain legally privileged and confidential information intended
solely for the use of the addressee. If the reader of this message
is not the intended recipient, you are hereby notified that any
reading, dissemination, distribution, copying, or other use of this
message or its attachments is strictly prohibited. If you have
received this message in error, please notify the sender
immediately and delete this message from your system. Thank you.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
