In frame switch use the following mappings, obviously change serial0 interface 
to R2 if your physical hardware is say Serial0/1 to R2...etc

Check what ends you DCE is and set clock as appropriate..



interface Serial0
description Connection to R2 INT S0/1/0
no ip address
no ip mroute-cache
encapsulation frame-relay
no fair-queue
clockrate 64000
frame-relay intf-type dce
frame-relay route 104 interface Serial1 401
frame-relay route 105 interface Serial2 501
frame-relay route 106 interface Serial3 601
frame-relay route 204 interface Serial1 402
frame-relay route 205 interface Serial2 502
frame-relay route 206 interface Serial3 602
frame-relay route 214 interface Serial1 412
frame-relay route 215 interface Serial2 512
frame-relay route 216 interface Serial3 612
frame-relay route 224 interface Serial1 422
frame-relay route 225 interface Serial2 522
frame-relay route 226 interface Serial3 622
!
interface Serial1
description Connection to R4 INT s0/0/0
no ip address
encapsulation frame-relay
clockrate 2000000
frame-relay intf-type dce
frame-relay route 401 interface Serial0 104
frame-relay route 402 interface Serial0 204
frame-relay route 405 interface Serial2 504
frame-relay route 406 interface Serial3 604
frame-relay route 412 interface Serial0 214
frame-relay route 415 interface Serial2 514
frame-relay route 416 interface Serial3 614
frame-relay route 422 interface Serial0 224
frame-relay route 425 interface Serial2 524
frame-relay route 426 interface Serial3 624
!
interface Serial2
description Connection to R5 int S0/1/0
no ip address
encapsulation frame-relay
clockrate 64000
frame-relay intf-type dce
frame-relay route 501 interface Serial0 105
frame-relay route 502 interface Serial0 205
frame-relay route 504 interface Serial1 405
frame-relay route 506 interface Serial3 605
frame-relay route 512 interface Serial0 215
frame-relay route 514 interface Serial1 415
frame-relay route 516 interface Serial3 615
frame-relay route 522 interface Serial0 225
frame-relay route 524 interface Serial1 425
frame-relay route 526 interface Serial3 625
!
interface Serial3
description Connection to R6 Int S4/0
no ip address
encapsulation frame-relay
clockrate 115200
frame-relay intf-type dce
frame-relay route 601 interface Serial0 106
frame-relay route 602 interface Serial0 206
frame-relay route 604 interface Serial1 406
frame-relay route 605 interface Serial2 506
frame-relay route 612 interface Serial0 216
frame-relay route 614 interface Serial1 416
frame-relay route 615 interface Serial2 516
frame-relay route 622 interface Serial0 226
frame-relay route 624 interface Serial1 426
frame-relay route 625 interface Serial2 526

--
BR

Tony

Sent from my iPhone on 3

On 20 Aug 2012, at 15:47, "Christian Z. Capitan" <[email protected]> 
wrote:

> Hello,
> 
> 
> 
> Where can I find the config's for the frame switch? I own the BLS, I have my
> own gear and the directory
> "IPexpert-RandS-Volume-1-Configs-and-Diagrams-v11.0" does not have the
> frames switch configs.
> 
> 
> 
> I guess I could figure it out, just wanted to save some cycles.
> 
> 
> 
> Thanks!
> 
> 
> 
> -Chris
> 
> 
> 
> 
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
> 
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to