I found new version of Ubuntu have problem with vlan tag so I had to switch to version 11.04
Thanks On Sep 29, 2012 9:16 PM, "G. Mitchell Peterson" <[email protected]> wrote: > I'm working on getting my lab up and running using the breakout switch > method on an Ubuntu Server 12.04 x64 server. I can't seem to get the trunk > on the server working though. Can someone post a snip-it of their > interfaces file? I was hoping that it behaved like a dot1q trunk in Cisco > world, but that doesn't seem to be the case. There's no trunk allowed type > command from what I can gather. Do I just make a sub for each VLAN going > over the trunk like below? I really, really dislike that I have to assign > an IP when using the static command so I'm hoping one of you network > wizards knows a trick to this. I tried only using auto ethX and setting > the MTU but it error'd out. So, apparently either you assign an IP or you > assign DHCP but you have to do one or the other. Anyone see an issue with > assigning a /32 in the 127.0.0.0/8 network to these since I have to give > it > something? > > #Trunk to breakout > auto ethX > iface ethX inet static > adddress 127.0.0.100 > netmask 255.255.255.255 > mtu 1536 > > #VLAN 101 on ethX > auto ethX.101 > iface ethX.101 inet static > adddress 127.0.0.101 > netmask 255.255.255.255 > > #VLAN 102 on ethX > auto ethX.102 > iface ethX.102 inet static > adddress 127.0.0.102 > netmask 255.255.255.255 > > Thanks, > Mitch > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
