To add, I'm using GLC-T on both sides, on 3750 when the port is switchport,
it is UP-UP, but on 7609S it is DOWN-DOWN. But when I change the 3750 port
to L3 it also changes to DOWN-DOWN. The ports are connected directly.
on 7609S:
sh ver:
c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version
15.1(3)S
BASEBOARD: RSP720
1 SIP-400 controller (5 GigabitEthernet)(4 POS).
4294967293 Ethernet interfaces
1 Virtual Ethernet interface
sh mod all:
Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------
----------
5 2 Route Switch Processor 720 (Active) RSP720-3C-GE
8 0 4-subslot SPA Interface Processor-400 7600-SIP-400
Mod MAC addresses Hw Fw Sw
Status
--- ---------------------------------- ----- ------------- ------------
------
5 001d.4558.fb9c to 001d.4558.fb9f 5.2 12.2(33r)SRD 15.1(3) Ok
8 001b.53cc.d040 to 001b.53cc.d0bf 2.4 15.1(3)S 15.1(3)S Ok
Mod Sub-Module Model Serial Hw
Status
---- --------------------------- ------------------ ----------- -------
------
5 Policy Feature Card 3 7600-PFC3C JAE1224LAJO 1.1 Ok
5 C7600 MSFC4 Daughterboard 7600-MSFC4 JAE1224L2FO 1.1 Ok
8/0 5xGE SPA SPA-5X1GE-V2 JAE141003QJ 1.2 Ok
8/1 4xOC3 POS SPA SPA-4XOC3-POS JAE12046H75 1.0 Ok
Mod Online Diag Status
---- -------------------
5 Pass
8 Pass
8/0 Pass
8/1 Pass
7 Gigabit Ethernet interfaces
4 Packet over SONET interfaces
sh hw-module all fpd:
==== ====================== ======
=============================================
H/W Field Programmable Current Min.
Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== ===========
==============
8 7600-SIP-400 2.4 1-ROMMON 1.3
1.3
2-I/O FPGA 0.82
0.82
3-SWITCH FPGA 0.39
0.39
---- ---------------------- ------ ------------------ -----------
--------------
8/0 SPA-5X1GE-V2 1.2 1-GE I/O FPGA 1.10
1.10
---- ---------------------- ------ ------------------ -----------
--------------
8/1 SPA-4XOC3-POS 1.0 1-I/O FPGA 3.4
3.4
==== ====================== ======
=============================================
sh hw-module subslot all entity:
Entity state for SPA in subslot 8/0
SPA type: (0x50A) 5xGE SPA
last spa type: (0x50A) 5xGE SPA
oper_status: (1) ok
card status: (2) full
last trap: spa type: (0x50A) 5xGE SPA
last trap: oper status: (1) ok
last_spa_env_get_ok: false
last_spa_env_read_time: (0) 4294967295 msecs ago
resync_reqd: false
resync_count: 0
SPA physical index: 2040
SPA container index: 2007
transceiver 0
container index: 2091
module entity index: 2092
port index: 2093
chassis index: 0
operational status: (2) ok
non-zero xcvr sensors:
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
