Hi all,
Vol2Lab 18 FR task says "you are only allowed to use and see the required
PVCs", so I have made sure to have no frame-relay inverse-arp before enabling
the interface.
When I look at the mapping I can see only the pvc I am using:
R2#sh frame-relay map
Serial1/1 (up): ip 151.11.26.6 dlci 206(0xCE,0x30E0), static,
broadcast,
IETF, status defined, active
Serial1/1 (up): ip 151.11.26.2 dlci 206(0xCE,0x30E0), static,
IETF, status defined, active
But if I look at the pvc:
R2#sh frame-relay pvc
PVC Statistics for interface Serial1/1 (Frame Relay DTE)
Active Inactive Deleted Static
Local 1 0 0 0
Switched 0 0 0 0
Unused 6 2 0 0
DLCI = 204, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial1/1
!!!!Rest of output omitted!!!!!!!
I can "see" all the other ones. So I suppose my issue is with the wording of
the task as I can "see" all the other PVCs. There is no way of NOT seeing the
PVCs in the show frame-relay pvc command, right?
Am I missing something ?
Fulvio
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
