If you are configuring an LACP etherchannel, you can bundle up to 16 interfaces with 8 of them active. The other 8 interfaces will be in hot standby mode waiting to become active. I you want an interface to be preferred then you can use lacp port priority x. The lower the number, the higher the priority. That will guarantee that your interface will be active as part of the bundle if you add more than 8 interfaces to the group.
Respectfully, Ryan Krcelic On 1/5/13 7:26 PM, "Marko Milivojevic" <[email protected]> wrote: > Don't they come up at the same time? :-) > > -- > Marko Milivojevic - CCIE #18427 (SP R&S) > Senior CCIE Instructor - IPexpert > > On Sat, Jan 5, 2013 at 6:12 AM, Lukasz <[email protected]> wrote: >> Hi All, >> >> >> Quick question. If you have etherchannel with two links between Cat1 and >> Cat2. If any other port is added into the port channel then I would like >> specific interface to be preferred to come up first on both switches. Is >> there any way of doing it? >> >> Regards, >> Lukasz >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs V/r, Ryan Krcelic _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
