1. that is true but R6 fa0/0 is connected to sw2

2. You are right I need two community vlans and one primary to make it work. I have just tested it and it works.


Many thanks for your help.


Regards,
Lukasz

On 2013-01-12 16:55, Rob Pool wrote:
I believe you have two issues with your first solution.

1. If I remember proctor labs topology correctly, r2's 0/1 interface
is connected to sw2 and r6's 0/0 is connected to sw1. If that's the
case, sw protected won't protect you from anything because it doesn't
work across switches.

2. If r2 and r6 were connected to the same switch and switch port
protected, they wouldn't be able to talk to one another but everything
else in the vlan that's not switch port protected. You said that r6
and r2 would talk via layer 3 r1. If r2 and r6 are in the same vlan,
what mechanism would you use to make that happen?

Based on your requirements, it's my opinion that you need to
configure a parent vlan and two community vlans.

Sent from my iPhone

On Jan 12, 2013, at 10:01 AM, Lukasz <[email protected]> wrote:

Hi All,


I am using proctorlabs to run some tests on private vlans and on switchport protected command.


My scenario is as follows:


R1 Fa0/1 --- Fa0/1 Cat2  fa0/2 --- Gi0/1 R2
            Fa0/6 --- Fa0/0 R6
            Fa0/7 --- Fa0/0 R7
            Fa0/8 --  Fa0/0 R8


Router interfaces are in 10.1.2.x/24 network where x is routers number.

Tasks:
- Routers (R2,R6,R7,R8) should be in the same VLAN.
- R2 and R6 should talk to each other but they should not be able to talk to R7 and R8. - R7 and R8 should be able to talk to each other and also to other devices in the same vlan (when they will be added in the future).

First without any settings on Cat2 I have run ping from R1 to other routers and it was successfull.

My suggested solution. Put switchport protected on fa0/2 and fa0/6 so they should be able to talk to each other via Layer 3 device (R1). Put R7 and R8 in community private-vlan so they can talk to each other but not to R2 and R6.

Is that logic correct?


Thanks for all comments.


Regards,
Lukasz


_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to