Are you saying the 3750 is not even accepting the range command or that it's just not setting the dscp value as expected?
Peter Fabian | Senior Voice Engineer On Thu, Jan 24, 2013 at 2:13 PM, John Dooner <[email protected]> wrote: > Hi everyone, > I cannot get a 3750x to remark video traffic if I use these commands. I > have abbreviated the config to concentrate on one aspect. > > class-map match-any CLASS-VIDEO > match access-group name ACL-VIDEO > ! > policy-map POLICY-INGRESS > class CLASS-VIDEO > set ip dscp af41 > ! > ip access-list extended ACL-VIDEO > permit udp any any range 2326 2487 <-----this line does not seem to work > and the traffic will go out dscp 0. > > But if I change the extended access-list from permit range to permit equal > the UDP port, it will work. Example: > > class-map match-any CLASS-VIDEO > match access-group name ACL-VIDEO > ! > ! > policy-map POLICY-INGRESS > class CLASS-VIDEO > set ip dscp af41 > ! > ip access-list extended ACL-VIDEO > permit udp any any eq 2344 <---this works and the traffic is remarked > DSCP 41. > > Does anyone have any ideas? I don't see ACL hit, but I think you cannot see > any access-list hits because of it being nested in the policy map.The > version of IOS is 12.2(55)SE3 LANBASE. > > Thanks, > JD > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
