-----Original Message-----
From: Khizer Rehman <[email protected]>
Sent: Tuesday, March 05, 2013 10:20 AM
To: [email protected]
Cc: [email protected]
Subject: Re: [OSL | CCIE_RS] DMVPN EIGRP ROUTES UPDATE WITH DELAY


Thanks Randy and sorry for delay. Actually we are using eigrp topology on each 
location and connected each offices with DMVPN. So there were two things went 
wrong during installing new switches on our location.


There was a mismatched subnet mask on SWX-03 for VLAN 100 - it had a /25, but 
should be a /24. The EIGRP neighbor between these switches was bouncing, so by 
changing the subnet to a /24, this solved the EIGRP neighbor between SWX-03 and 
SWX-01.
There were duplicate IP addresses on VLAN 500 on SWX-42-E and SWX-41-E - both 
had .2 configured on VLAN 500. I changed SWX-42-E VLAN500 to .3, and a new 
EIGRP neighbor formed. EIGRP was getting confused between the same IP address 
from two different switches.

So after fixing these subnets on new swx's we were able to resolved the eigrp 
delay. Thanks everyone for your assistance.
 
 
Regards,
 
Khizer Rehman
 
 

 


> CC: [email protected]
> From: [email protected]
> Subject: Re: [OSL | CCIE_RS] DMVPN EIGRP ROUTES UPDATE WITH DELAY
> Date: Mon, 14 Jan 2013 07:16:28 -0800
> To: [email protected]
> 
> Please share what was done to correct the issue. 
> 
> -Randy
> 
> On Jan 12, 2013, at 5:33 AM, Khizer Rehman <[email protected]> wrote:
> 
> > 
> > I didn't get any update from this group. But i have fixed this issue. Now 
> > the dmvpn failover is timeless, even our RDP session wasn't disconnect 
> > during failover.
> > 
> > 
> > 
> > 
> > Regards,
> > 
> > Khizer Rehman
> > 0300 8113462
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > From: [email protected]
> > To: [email protected]; [email protected]
> > CC: [email protected]
> > Subject: RE: [OSL | CCIE_RS] DMVPN EIGRP ROUTES UPDATE WITH DELAY
> > Date: Mon, 7 Jan 2013 10:37:02 +0000
> > 
> > 
> > 
> > 
> > Please let em know if anyone have idea about why the eigrp update is slow. 
> > Here are the detail about DMPVN Setup. 
> > 
> > 
> > Tunne1 - 172.10.1.1/24 & Tunnel2 - 172.10.2.1/24
> > We have two HUB Routers. HUB

[The entire original message is not included]
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to