What's your ACL and where is it applied? To the VTY lines on R1 or to the interface between R1 and R2?
Did you test it without the ACL? On Tue, Mar 5, 2013 at 10:42 AM, <[email protected]> wrote: > Hi all, > > > > can someone explain the follow output: > > > > R1#telnet 192.168.1.2 > > Trying 192.168.1.2 … Open > > [Connection to 192.168.1.2 closed by foreign host] > > > > I have an ACL applied to R1 and nothing applied to R2 . > > > > WHy output show open and then closed? I'm expected only msg closed... > > > > -- > This message is intended for the individual(s) to whom it is addressed > and may contain information that is privileged or confidential. > If you are not the addressee you must not read,use or disclose the > contents of this email. > Whilst all reasonable care has been taken to avoid the transmission of > viruses, the recipient should carry out virus and other checks, > as they consider appropriate. > Myself accepts no responsibility in this regard. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs -- Eric Day [email protected] _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
