Yup - that will work to test whether the connection is being dropped. Good call, Steve.
-- Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / Managing Partner - IPexpert On Tue, Mar 12, 2013 at 4:46 PM, Steve Di Bias <[email protected]> wrote: > Hi Fulvio, > > Without looking at the lab this may not be what you're looking for but it's > worth a shot. As a test try to telnet on port 22 while sourcing from the > loopback and forcing IPv6. If you can connect to that port then you know > that it's working: > > telnet X.X.X.X 22 /source-interface lo0 /ipv6 > > HTH > > Thanks, > Steve Di Bias- CCIE #32840 > > > On Tue, Mar 12, 2013 at 4:03 PM, Fulvio allegretti > <[email protected]>wrote: > > > HI all, > > > > How do I source ssh traffic from the loopback interface in ipv6? This is > a > > task of volume 3 lab 5 configuration part. Unfortunately Marko in his > video > > gives us the solution but doesn't go through the verification, so I am > not > > sure how I would verify this in the real lab. I have tried google, but > > nothing good comes up. Hope you can help. > > Thanks > > Fulvio > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
