The important thing you need to understand is where in your particular topology are you modifying /marking and where the transport label is being disposed this is typically where you wouls be using the QoS group placeholder, so you'd need to set on ingress from a P router then match on egress to a CE router....in an MPLS L3 VPN design
There are many models to consider: Uniform, Pipe, Long Pipe and Short Pipe modes Id read up doc cd as a starting place then look into INE's SP videos before starting on cli on this topic, my 2 cents -- BR Tony Sent from my iPhone on 3 On 16 Jul 2013, at 17:44, Kenneth George <[email protected]> wrote: > How do I create qos-group 30? > Looking into QoS Groups, and I found this syntax and doc: > > (config)# class-map class1 > (config-cmap)# match qos-group 30 > (config-cmap)# exit > (config)# policy-map policy1 > (config-pmap)# class class1 > (config-pmap-c)# set qos-group cos > > http://www.cisco.com/en/US/docs/ios-xml/ios/qos_classn/configuration/xe-3s/qos-classn-grp-mtch-set.html > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
