Hello Team,
I configure the following topology to play with the routing redistribution.
I want to achieve the following.
Routing Redistribution Point are R5, R6 and R11
=> On R5 we are redistributing from RIP to OSPF, EIGRP 200 to OSPF,
and from OSPF to EIGRP 200 and OSPF to RIP.
=> On R6 I am redistributing from EIGRP 200 into RIP and from RIP into EIGRP
200.
=>On R11 from OSPF into EIGRP 200 and from EIGRP 200 into OSPF.
What I would like to achieve the following
-> When BB2 try to trace route the loop back of R8 loop back ip address
(8.8.8.8) It should follow the below path
BB2-> R14-> R12 -> R11 -> R7 -> R6 -> R8
-> When BB1 try to trace route the loop back of R8 loop back ip address
(8.8.8.8) It should follow the below path
BB1->R1->R2 -> R3 -> R5 -> R6 -> R8
-> When any BB1 or BB2 try to trace route the loopback of R10 it should
follow the below path
R5->R6->R7->R9->R10
Your suggestions or input will be highly appreciated.
Regards,
Waqas Daar
Regards,
Waqas Daar
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
