I am looking for the R&S path that we will have access to at the time of the lab to locate and lookup EtherType values in order to configure VACLs. (ie. match IPv6, ARP, etc)
Thank you, Chris From: Edgar Mauricio Diaz Orellana [mailto:[email protected]] Sent: Wednesday, October 23, 2013 4:24 PM To: Ryan Jensen Cc: Christopher Lemish; [email protected] Subject: Re: [OSL | CCIE_RS] DocCD: EtherType Values on the master index there is the 2 sites where you can find the ethertype entries on cisco cli. http://www.cisco.com/en/US/docs/ios/mcl/allreleasemcl/all_05.html there are 2 nodes exposed dot1q tunneling ethertype IR<http://www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-d1.html#GUID-D0E2D324-793F-462E-962A-C7C23E6A0B0F>, LSW<http://www.cisco.com/en/US/docs/ios-xml/ios/lanswitch/command/lsw-b1.html#GUID-D0E2D324-793F-462E-962A-C7C23E6A0B0F> one (IR) for * Cisco IOS Interface and Hardware Component Command Reference http://www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-d1.html#GUID-D0E2D324-793F-462E-962A-C7C23E6A0B0F and for (LSW) * Cisco IOS LAN Switching Command Reference http://www.cisco.com/en/US/docs/ios-xml/ios/lanswitch/command/lsw-b1.html#GUID-D0E2D324-793F-462E-962A-C7C23E6A0B0F best regards Edgar On Wed, Oct 23, 2013 at 5:17 PM, Edgar Mauricio Diaz Orellana <[email protected]<mailto:[email protected]>> wrote: here is it! http://www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-d1.html#wp1648777610 cisco ios 12.4T System Management o Cisco IOS Interface and Hardware Component Command Reference<http://www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-cr-book.html> o dot1q tunneling ethertype To define the Ethertype field type used by peer devices when implementing Q-in-Q VLAN tagging, use the dot1qtunnelingethertypecommand in interface configuration mode. To remove the VLAN tag Ethertype, use the no form of this command. no dot1q tunneling ethertype { 0x88A8 | 0x9100 | 0x9200 } no dot1q tunneling ethertype Syntax Description 0x88A8 |0x9100|0x9200 Type of Ethertype field. Command Default The Ethertype field used by peer devices when implementing Q-in-Q VLAN tagging is 0x8100. Command Modes Interface configuration (config-if) Command History Release Modification 12.3(7)T This command was introduced. 12.3(7)XI1 This command was implemented on the Cisco 10000 series routers. 12.2(31)SB2 This command was integrated into Cisco IOS Release 12.2(31)SB2. 12.2(33)SRC This command was integrated into Cisco IOS Release 12.2(33)SRC. Cisco IOS XE Release 2.2 This command was integrated into Cisco IOS XE Release 2.2. takes me a while to remember where is it... but i found it again! thanks for the trip... i need to add more skills to find something on cisco config guidelines! best regards. Edgar CCIE #unnumbered! On Wed, Oct 23, 2013 at 4:29 PM, Ryan Jensen <[email protected]<mailto:[email protected]>> wrote: If I recall, they're listed in the wireless documentation. On Tue, Oct 22, 2013 at 9:23 PM, Christopher Lemish < [email protected]<mailto:[email protected]>> wrote: > Can anyone comment on the path that we can navigate to find all Ethertype > values during the lab? > > Did a search and found: > Products>Routers>Cisco 3200 Series Rugged Integrated Services > Routers>Configure>Configuration Examples & Tech Notes>Cisco 3200 Series > Wireless MIC Software Configuration Guide>Protocol Filters > > I'm not sure if this would be an available link during the R&S Lab exam, > but does anyone know of an easier path? > > Thank you, > Chris > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com<http://www.ipexpert.com> > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
