Hi,
Questions 1: How can I reserve 10% BW for a given class-map and at the same
time limit that class-map so if there is congestion present on the egress
link, traffic for that class-map can't exceed the allocated 10% of BW
without using the priority command.
The bandwidth command can exceed allocated rate during congested and
non-congested conditions.
The priority command can't exceed allocated rate during congestion but can
exceed allocated rate when the link is not congested.
Question 2: what is the order that traffic is treated if a policy-map has
two class-maps configured with LLQ. Will traffic from class LLQ1 be queued
first over traffic matched by LLQ2? If LLQ1 is serviced first, then would I
be correct in assuming that the "priority" given to class-map LLQ1 in this
case would be based on its position inside the policy-map?
Policy-map test
Class LLQ1
Priority percent 10
Class LLQ2
Priority percent 5
Thank you,
Max
_______________________________________________
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
iPexpert on YouTube: www.youtube.com/ipexpertinc
