Hi, Bob is right here. At the moment the 'distance' command is only for EIGRP Internal routes. It has no effect on EIGRP External routes. 'distance eigrp' command on the other hand works for external routes, however, with this command one CANNOT change AD of some SELECTIVE External routes! Hope this helps.
Narendra Naukwal On Thursday, 23 January 2014 7:29 AM, Bob McCouch <[email protected]> wrote: Without consulting my notes, I believe with EIGRP the external distance is all-or-nothing. You can change the overall distance of all external routes, but you cannot change the distance on a per-prefix basis, as it could destroy EIGRPs inherent loop-free behavior. Bob CCIE #38296 HerdingPackets.net -- Sent from my iPhone, please excuse any typos. > On Jan 22, 2014, at 7:03 PM, mesikoo kamali <[email protected]> wrote: > > Hi, > > > > Is it possible to change the distance of an EIGRP external route using the > "distance 100 <src rtr> <src wildcard mask> <acl>" ? or the only way is > distance eigrp x y? > > > > Thanks > > > > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc _______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc _______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
