I am working through some of the labs and I am having some difficulty with the dot1x authentication sections. I am using my own 3560s with IOS 12.2(55).
It appears that the dot1x port commands have changed since the Labs were written. For example in in Vol 1 Lab 3 task 3.13 - The solution guide uses these interface commands: dot1x auth-fail vlan 100 dot1x guest-vlan 200 However the new interface commands appear to be: authentication event fail action authorize vlan 100 authentication event no-response action authorize vlan 200 Then the solution guide uses this command to verify: show dot1x int f0/7 det However that command does not work and the cisco documentation says to use the command "show authentication" to verify but that doesnt show me anything. How can I verify my dot1x interface configurations with an output similar to what the old "show dot1x int f0/7 det" command displays? Thanks in advance, Steven Allspach _______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
