So if the lab task actually said "using a prefix-list" I would probably do exactly what it says and use the prefix-list directly on the neighbor, particularly if I've read the entire lab (you did that, right?) and determined that I wouldn't have to do any other outbound policy that would require a route-map.
That said, if the lab did not specify "using a prefix-list" and just said "ensure R2 advertises only a default route to blah blah blah", then I think either the route-map or prefix-list would be acceptable. On Tue, Mar 4, 2014 at 6:10 PM, freddy morales <[email protected]>wrote: > Sorry I meant the command neighbor prefix-list! > > From: [email protected] > Sent: Tuesday, March 04, 2014 6:07 PM > To: [email protected] > Subject: LAB 18 volume 1 > > OK so this task asked to only allow a default route using a prefix-list > and it is all bgp... I created the prefix-list but used a route-map to > match it and on the solutions guide I noticed the neighbor filter-list > command was used instead. So my question is: in the actual exam, if I do > the route-map matching the prefix-list instead of the neighbor filter-list > command.. does that still counts? I mean I AM using a prefix-list after all. > > > Thanks! > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc > _______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
