below is the server configuration Extended IP access list EZVPN 10 permit ip host 3.3.3.3 any crypto isakmp policy 10 encr 3des hash md5 authentication pre-share group 2crypto isakmp client configuration group EZVPN_group key cisco123 pool EZVPN acl EZVPNcrypto ipsec transform-set EZVPN esp-3des esp-md5-hmaccrypto dynamic-map dynamic 10 set transform-set EZVPN reverse-routecrypto map EZVPN_MAP client authentication list XAuthcrypto map EZVPN_MAP isakmp authorization list XAuthcrypto map EZVPN_MAP client configuration address respondcrypto map EZVPN_MAP 10 ipsec-isakmp dynamic dynamic crypto map EZVPN_MAP
> CC: [email protected] > From: [email protected] > Subject: Re: [OSL | CCIE_Security] SPlIT_TUNNEL hardware client mode > Date: Sat, 12 Nov 2011 18:23:27 -0500 > To: [email protected] > > Can you send the acl? > > Thanks > Pouya > > Sent from my iPhone > > On Nov 12, 2011, at 5:29 PM, waleed ' <[email protected]> wrote: > > > Hello , > > I configure remote vpn client on router and connect to ezvpn server , but > > split tunnel not working when I did show crypto sa on the client I do not > > see split tunnel is working and the client mode is client , any advice on > > this ? > > Regards > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
