The link below will help you more.
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml#c2


On 1/29/08, anil batra <[EMAIL PROTECTED]> wrote:
>
> Thanks  Ovais, Marco and Bala.
>
> So for actual I will use dspfarm..right.
>
>
> --- Marco Antonio Garcia Rodriguez
> <[EMAIL PROTECTED]> wrote:
>
> > Dspfarm below voice-card doesn´t has any
> > significance. I guess it is for old IOS. However, I
> > usually configure "dspfarm" instead "no dspfarm".
> > Mandatory parameter is "dsp services dsp", it is
> > needed for DSP transcoding or conference.
> >
> >
> >
> > Dspfarm on global configuration, if I am not wrong,
> > it is mandatory command on PVDM DSP´s used on voice
> > lab, but is not necessary on dsp´s PVDM2 (as DSP´s
> > on ipexpert racks).
> >
> >
> >
> >
> >
> > ________________________________
> >
> > De: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] En
> > nombre de Balamurugan Singaram
> > Enviado el: Lunes, 28 de Enero de 2008 10:19 p.m.
> > Para: ovais Iqbal; anil batra
> > CC: ccie_voice@onlinestudylist.com
> > Asunto: Re: [OSL | CCIE_Voice] NM-HDV as conference
> > bridge
> >
> >
> >
> > Hi,
> >
> >
> >
> > Could you please explain the Significance of dspfarm
> > and no dspfarm, in some voicelab exercise I have not
> > seen the dspfarm is enable. It is very important to
> > enable the dspfarm.
> >
> >
> >
> > And also what is difference between enable DSPFARM
> > in global mode and voice-card level.
> >
> >
> >
> > Thank you,
> >
> > Bala.
> >
> >
> >
> > ovais Iqbal <[EMAIL PROTECTED]> wrote:
> >
> > Try removing the underscore from the CFB_Mac-address
> > on CCM, it is supposed to register with
> > cfbmac-address.
> >
> >
> >
> > and also put dspfarm command under the voice-card0
> >
> >
> >
> > Thanks
> >
> >
> >
> > Ovais.
> >
> >
> >
> > On 1/28/08, anil batra <[EMAIL PROTECTED]> wrote:
> >
> > Hello Mark
> >
> > I am trying to register NM-HDV in my lab(with ESW)
> > to
> > the Callmanager. The router config is -
> >
> > "voice-card     0
> > dsp services dspfarm
> >
> >
> > dspfarm confbridge maximum sessions 1
> > dspfarm codec g729 vad disable
> > dspfarm
> >
> >
> > sccp
> > sccp local Vlan210
> > sccp ccm 192.168.100.11 <http://192.168.100.11/>
> > priority 1
> > sccp ccm 192.168.100.12 <http://192.168.100.12/>
> > priority 2"
> >
> > On Callmanager - I have added that as IOS Confercing
> > with name as cfb_<MAC Address of int vlan for voice>
> > on the router.
> >
> > it's not showing as registered, am I missing or
> > doing
> > somehting wrong here please.
> >
> > Appreciate your kind support on this.
> >
> > Thanks
> > -AB
> >
> >
> >
> >
> >
> >
> >
> >
>
> ____________________________________________________________________________________
> > Be a better friend, newshound, and
> > know-it-all with Yahoo! Mobile.  Try it now.
> >
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> >
> >
> >
> >
> > --
> > Ovais Iqbal
> > 416-294-7869
> >
> >
> >
> >  Send instant messages to your online friends
> > http://uk.messenger.yahoo.com
> >
> >
>
>
>
>
>
> ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
>
>
>
>
> ____________________________________________________________________________________
> Never miss a thing.  Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>



-- 
Ovais Iqbal
416-294-7869

Reply via email to